Photo: theaseanpost.com

Based on the figures published by the Economic Development Board (EDB) on Friday (24 April), Singapore’s factory output experienced a recovery in March.
Manufacturing output last month was not highly impacted by the COVID-19 pandemic, but a stronger impact might begin from April, partly caused by the erected circuit breaker measures, EDB warned.
Pharmaceutical output, which has a low base in 2019, increased after the decline by the revised figure of 0.7 per cent in February. Due to this, manufacturing activity in March rose 16.5 per cent over the same month in 2019.
Factory output remained unchanged except for biomedical manufacturing output.
Manufacturing output rose 21.7 per cent based on a seasonally adjusted month-on-month basis. This is a reverse from the 22.1 per cent decline in February over the previous month.
Compared to the same period in 2019, biomedical manufacturing output increased 91.4 per cent in March. Higher production of active pharmaceutical ingredients and biological products also fuelled pharmaceuticals output to increase by 12.6.6 per cent. Higher export demand for medical devices also led to the increase of the medical technology segment by 6.3 per cent.
The next big increase came from the growth in precision engineering output by 21.2 per cent last month. This growth was mainly driven by the 28.7 per cent increase in the machinery and systems due to the higher output of semiconductor equipment.
On the whole, there was a 20.6 per cent growth in the precision engineering cluster from January to March, compared to the same period last year.
Furthermore, transport engineering output rose by 7.6 per cent year-on-year in March. There was a 15.2 per cent and 11.9 per cent increase in the land transport segment and aerospace segment, respectively. Repair and maintenance activity levels were higher for the commercial airlines in the aerospace segment. However, due to lower work level done in offshore projects, the marina and offshore engineering segment dropped 0.7 per cent.
Compared to the same period in 2019, the transport engineering cluster in the first three months this year grew overall by 3.2 per cent.
As for the chemical clusters, output increased by 0.8 per cent last month, fuelled by the increase in petroleum refining throughput by 30.9 per cent after the maintenance shutdowns in 2019.
The increased production of industrial gases and additives caused the specialties segment to grow 8.8 per cent whereas other chemical segments grew 5.9 per cent due to increased output of fragrances.
Nonetheless, there was a 7.2 per cent contraction in the petrochemical segment. Compared to the same period last year, output of the chemicals cluster dropped 0.1 per cent within the first three months of 2020.
Looking at general manufacturing output, there was a decline by 7.9 per cent last month, unlike the other clusters which saw output fell. These clusters include the tobacco, food and beverage segments as well as the miscellaneous industries and printing.
Also, electronic output recorded a drop by 9.2 per cent, and all segments in the cluster also saw decline. On the whole, compared to the same period last year, output of the electronics cluster dropped 10.5 per cent within the first three months of 2020.

Source: straitstimes.com
Subscribe
Notify of
0 Comments
Inline Feedbacks
View all comments
You May Also Like

部分大型基建工程近年出现成本超支

在本月11日,《海峡时报》一篇用户付费文章揭露,地铁环线延长线第六阶段(Circle Line 6,或简称CCL6),预计总耗资48.5亿新元。 CCL6总长约四公里,增设三站连接滨海湾站和港湾站。这意味着,每公里的成本就达到12亿元,是首五阶段平均成本的五倍。根据2017年4月的《联合早报》报导,当时工程预计耗资37亿元,成本足足增涨了11.5亿元。 陆路交通管理局(LTA)针对《海时》提问指出,成本高涨基于数项因素,包括地下建设工程的挑战和复杂程度,以及必须设法与现有运作中的首五期环线互相整合。 陆交局也指出,通膨也是其中一项因素。总长33公里的首五期环线是在20年前开始的,当时的价格成本较低。 其实近年来,也可见许多在本土施工的基本设施,最终成本远高于预期。 滨海沿海高速公路(Marina Coastal Expressway) 举例2007年,政府批准陆交局以25亿元的成本,兴建五公里长的滨海沿海高速公路。 当时,政府相信该高速公路能应付滨海湾区域密集发展而增长的交通流量,同时也作为滨海湾与全岛其他区域连接的主要干线。…

Progress Singapore Party announces first slate of candidates for upcoming General Election

The Progress Singapore Party (PSP) announced six of its candidates who will…

国会:选区范围检讨委员会仍未成立

选区范围检讨委员会仍未成立。 贸工部长陈振声是在今日(8日)代表李显龙总理书面答复工人党秘书长毕丹星的提问。这已是毕丹星第二度询问上述委会是否已成立。 选区范围检讨委员会的成立,旨在于选举前划分选区,也是迈入大选前进行的例行工作。 在2006年和2011年,该委会用了四个月时间提交报告。在选区划分地图公布后,下一步就是解散国会,召开选举。 2011年选举,从公布选区划分地图再到提名日,有62天的差距。 在2015年7月24日公布新的选区地图,提名日则是在9月1日,从公布选区划分到提名,只有39天。 总理曾在2016年1月表示,将建议选区范围检讨委会缩小集选区规模,划出更多单选区。 直到总理李显龙宣布成立选区范围检讨委员会、该委会在选举前公布选区划分报告之前,潜在候选人都不会知道,下届选举的选举划分会是怎样的。 今年3月1日,工人党议员毕丹星曾质问,为何不在上述委会成立后政府自行作出宣布,但贸工部长陈振声则代总理回答,惯例是让委会专业地进行工作,不受不必要媒体关注或公共压力影响。

父母家长亦申诉电动滑板车禁令造成不便

早前,交通部宣布政府和三大送餐公司协商,政府和三家主要送餐公司将联手,提供700万元的津贴,协助送餐员把电动滑板车折旧,改用脚踏车等其他代步工具。 不过,在一些社交媒体,也有父母家长反映,他们也使用个人代步工具载送孩子上学放学,然而禁令也让他们面对许多不便,也无法达到“活跃通勤”的效果。 电动滑板车禁令自11月4日公布后,使依靠该代步工具送外卖的送餐员生计大受影响因。周二(12日)晚上,约300名送餐员出席在安谷民众俱乐部(Anchorvale Community Club)举行的对话会,也向盛港西单选区议员蓝彬明医生申诉他们的问题。 蓝彬明随后也在其脸书上,重点讲解他与送餐员们的商议,坦言没有完美的解决方案;禁止电动滑板车在行人道上行驶,是为了保护大多数行人的安全。 蓝彬明也指出,GrabFood为其送餐伙伴提供了转换交通工具的补助金;若送餐员有难处也可向他们的国会议员反映。 斥资700万元协助送餐员 据出席者向《今日报》反映,蓝彬明向他们详细讲解了总额700万元的以旧换新援助计划,以帮助送餐员们在无需额外付费下,将电动滑板车转换为电动脚车。 此计划是政府和新加坡三大送餐公司的协议合作,为三大送餐公司的送餐骑士们提供高达1000元现款,让他们将现有的电板车换成电动脚车或普通脚车。 蓝彬明也在其脸书帖文下总结说,“随着我们的改进,也希望行人能够为负责人的骑士们着想,尽可能地使用行人道,让骑士们能够执行责任之余,也照顾到行人安全” 。…